Oxygen-dependence of metabolic rate in the muscles of craniates

We present evidence that oxygen consumption (V_O2 ) is oxygen partial pressure (P_O2) dependent in striated muscles and P_O2 -independent in the vasculature in representatives of three craniate taxa: two teleost fish, a hagfish and a rat. Blood vessel V_O2 displayed varying degrees of independence in a P_O2 range of 15–95 mmHg, while V_O2 by striated muscle tissue slices from all species related linearly to P_O2 between 0 and 125 mmHg, despite V_O2 rates varying greatly between species and muscle type. In salmon red muscle, lactate concentrations fell in slices incubated at a P_O2 of either 30 or 100 mmHg, suggesting aerobic rather than anaerobic metabolism. Consistent with this finding, potential energy, a proxy of ATP turnover, was P_O2 -dependent. Our data suggest that the reduction in V_O2 with falling P_O2 results in a decrease in ATP demand, suggesting that the hypoxic signal is sensed and cellular changes effected. Viability and diffusion limitation of the preparations were investigated using salmon cardiac and skeletal muscles. Following the initial P_O2 depletion, reoxygenation of the Ringer bathing salmon cardiac muscle resulted in V_O2^s that was unchanged from the first run. V_O2 increased in all muscles uncoupled with p-trifluoromethoxylphenyl-hydrazone (FCCP) and 2,4-dinitrophenol (DNP). Mitochondrial succinate dehydrogenase activity, quantified by reduction of 3-(4,5-dimethylthiazol)-2,5-diphenyl-2H-tetrazolium bromide (MTT) to formazan, was constant over the course of the experiment. These three findings indicate that the tissues remained viable over time and ruled out diffusion-limitation as a constraint on V_O2.

Evaluation of heat stress indices using physiological comparisons in an alumina refinery in a sub-tropical climate

The production of alumina involves the use of a process known as the Bayer process. This method involves the digestion of raw bauxite in sodium hydroxide at temperatures around 250°C. The resultant pregnant liquor then goes through a number of filtering and precipitation processes to obtain the aluminium oxide crystals which are then calcined to obtain the final product. The plant is situated in a sub tropical climate in Northern Australia and this combined with the hot nature of the process results in a potential for heat related illnesses to develop. When assessing a work environment for heat stress a heat stress index is often employed as a guideline and to date the Wet Bulb Globe Temperature (WBGT) has been the recommended index. There have been concerns over the past that the WBGT is not suited to the Northern Australian climate and in fact studies in other countries have suggested this is the case. This study was undertaken in the alumina plant situated in Gladstone Queensland to assess if WBGT was in fact the most suitable index for use or if another was more applicable. To this end three indices, Wet Bulb Globe Temperature (WBGT), Heat Stress Index (HSI) and Required Sweat Rate (SWreq) were compared and assessed using physiological monitoring of heart rate and surrogate core temperature. A number of different jobs and locations around the plant were investigated utilising personal and environmental monitoring equipment. These results were then collated and analysed using a computer program written as part of the study for the manipulation of the environmental data . Physiological assessment was carried out using methods approved by international bodies such as National Institute for Occupational Safety & Health (NIOSH) and International Standards Organisation (ISO) and incorporated the use of a ‘Physiological Factor’ developed to enable the comparison of predicted allowable exposure times and strain on the individual. Results indicated that of the three indices tested, Required Sweat Rate was found to be the most suitable for the climate and in the environment of interest. The WBGT system was suitable in areas in the moderate temperature range (ie 28 to 32°C) but had some deficiencies above this temperature or where the relative humidity exceeded approximately 80%. It was however suitable as a first estimate or first line indicator. HSI over-estimated the physiological strain in situations of high temperatures, low air flows and exaggerated the benefit of artificial air flows on the worker in certain environments ie. fans.

Asexual reproduction does not produce clonal populations of the brooding coral Pocillopora damicornis on the Great Barrier Reef, Australia

We have investigated the relationship between genotypic diversity, the mode of production of brooded larvae and disturbance in a range of reef habitats, in order to resolve the disparity between the reproductive mode and population structure reported for the brooding coral Pocillopora damicornis. Within 14 sites across six habitats, the ratio of the observed (G o) to the expected (G e) genotypic diversity ranged from 69 to 100% of that expected for random mating. At three other sites in two habitats the G o /G e ranged from 35 to 53%. Two of these sites were recently bleached, suggesting that asexual recruitment may be favoured after disturbance. Nevertheless, our data suggest that brooded larvae, from each of five habitats surveyed, were asexually produced. While clonal recruitment may be important in disturbed habitats, the lack of clonality detected, both in this and earlier surveys of 40 other sites, implies that a disturbance is normally insufficient to explain this species’ continued investment in clonal reproduction.

The influence of different nanoparticles on a range of organic ionic plastic crystals

The addition of nanoparticles to an organic ionic plastic crystal can result in orders of magnitude increases in ionic conductivity, which makes these materials of interest as solid state electrolytes. However, this effect is not universal and depends on both the nature of the organic ionic plastic crystal and on the type of nanoparticle used. The effect of addition of TiO₂, Al₂O₃ and SiO₂ nanoparticles to a range of ionic materials with varying plasticity and rotator phase behaviour has been studied by thermal analysis and conductivity and the effect on the different materials is compared.

Sociocultural factors and perceptions associated with type 2 diabetes among sub-Saharan African migrants in Melbourne, Victoria

Aim: To explore how non-diabetic sub-Saharan African migrants residing in Melbourne, construct and interpret type 2 diabetes mellitus (T2DM) and its risk factors and to provide an evidence-based theoretical framework to inform community-based prevention programs. Methods: Seven focus group discussions (two with women only, two with men only and three of mixed gender) were carried out among Ghanaian, Zimbabwean, Sudanese and Burundian migrants living in Melbourne (n = 61; age range: 18 to 61 years). Results: Three distinct themes emerged: not paying much attention to the threat of T2DM and othering; T2DM being outside the individuals' control; and entrapment within rich industrialised culture and lifestyle. Participants perceived T2DM to be a disease of the wealthy caused by intake of too much sugar and sedentary behaviour, which were particularly compounded by lifestyle-related changes upon migration to an industrialised country. However, they also perceived T2DM to be associated with bad luck. Conclusions: Culturally competent prevention and education programs are needed to increase health literacy and dispel religious and cultural myths about T2DM among sub-Saharan African migrants.

Fine-scale patterns of genetic variation in a widespread clonal seagrass species

Seagrasses are ecosystem engineers that offer important habitat for a large number of species and provide a range of ecosystem services. Many seagrass ecosystems are dominated by a single species, with research showing that genotypic diversity at fine spatial scales plays an important role in maintaining a range of ecosystem functions. However, for most seagrass species, information on fine-scale patterns of genetic variation in natural populations is lacking. In this study, we use a hierarchical sampling design to determine the levels of genetic and genotypic diversity at different spatial scales (centimeters, meters, kilometers) in the Australian seagrass Zostera muelleri. Our analysis shows that at fine spatial scales (<1 m), levels of genotypic diversity are relatively low (R(Plots) = 0.37 ± 0.06 SE), although there is some intermingling of genotypes. At the site (10’s m) and meadow location (km) scale, we found higher levels of genotypic diversity (R(sites) = 0.79 ± 0.04 SE; R(Locations) = 0.78 ± 0.04 SE). We found some sharing of genotypes between sites within meadows, but no sharing of genotypes between meadow locations. We also detected a high level of genetic structuring between meadow locations (FST = 0.278). Taken together, our results indicate that both sexual and asexual reproductions are important in maintaining meadows of Z. muelleri. The dominant mechanism of asexual reproduction appears to occur via localized rhizome extension, although the sharing of a limited number of genotypes over the scale of 10’s of meters could also result from the localized dispersal and recruitment of fragments. The large number of unique genotypes at the meadow scale indicates that sexual reproduction is important in maintaining these populations, while the high level of genetic structuring suggests little gene flow and connectivity between our study sites. These results imply that recovery from disturbances will occur through both sexual and asexual regeneration, but the limited connectivity at the landscape scale implies that recovery at meadow-scale losses is likely to be limited.

Bacterial attachment on sub-nanometrically smooth titanium substrata

Despite the volume of work that has been conducted on the topic, the role of surface topography in mediating bacterial cell adhesion is not well understood. The primary reason for this lack of understanding is the relatively limited extent of topographical characterisation employed in many studies. In the present study, the topographies of three sub-nanometrically smooth titanium (Ti) surfaces were comprehensively characterised, using nine individual parameters that together describe the height, shape and distribution of their surface features. This topographical analysis was then correlated with the adhesion behaviour of the pathogenic bacteria Staphylococcus aureus and Pseudomonas aeruginosa, in an effort to understand the role played by each aspect of surface architecture in influencing bacterial attachment. While P. aeruginosa was largely unable to adhere to any of the three sub-nanometrically smooth Ti surfaces, the extent of S. aureus cell attachment was found to be greater on surfaces with higher average, RMS and maximum roughness and higher surface areas. The cells also attached in greater numbers to surfaces that had shorter autocorrelation lengths and skewness values that approached zero, indicating a preference for less ordered surfaces with peak heights and valley depths evenly distributed around the mean plane. Across the sub-nanometrically smooth range of surfaces tested, it was shown that S. aureus more easily attached to surfaces with larger features that were evenly distributed between peaks and valleys, with higher levels of randomness. This study demonstrated that the traditionally employed amplitudinal roughness parameters are not the only determinants of bacterial adhesion, and that spatial parameters can also be used to predict the extent of attachment.